Merchandise Description
New Refrigerant Two Phase Vacuum Pump(VP215RVP260R)
VP2R Series new refrigerant Two Phase Vacuum Pump
Outfitted with large quality solenoid valve to helps prevent oil backup into the method when the pump is turned off , or during a electrical power failure.
Specially for R407C,R410a etc
| Model | VP215R | VP225R | VP235R | VP245R | VP260R | VP280R | VP2100R | |
| Flow Fee (cfm) | 220V~/50Hz | 1.5CFM 42L/min |
two.5CFM 70L/min |
three.5CFM 100L/min |
4.5CFM 128L/min |
6CFM 170L/min |
8CFM 226L/min |
10CFM 283L/min |
| 115V~/60Hz | one.8CFM 50L/min |
3CFM 84L/min |
4CFM 114L/min |
5CFM 142L/min |
7CFM 198L/min |
9CFM 254L/min |
12 CFM 340 L/min |
|
| Actual Ultimate Vacuum | 3Pa 25Microns |
3Pa 25Microns |
3Pa 25Microns |
3Pa 25Microns |
3Pa 25Microns |
3Pa 25Microns |
3Pa 25Microns |
|
| Power(HP) | 1/four | 1/three | one/three | 1/2 | 3/4 | one | one | |
| Motor pace (r / min) |
220V~/50Hz | 2800 | 2800 | 1400 | 2800 | 1400 | 1400 | 1400 |
| 115V~/60Hz | 3400 | 3400 | 1700 | 3400 | 1700 | 1700 | 1700 | |
| Inlet Port (optional) | one/4 SAE | 1/4 SAE | one/4 SAE | one/4 SAE | 3/8 SAE | three/8 SAE | three/8 SAE | |
| Oil Potential (ml) | a hundred and eighty | 280 | 360 | 350 | 700 | 600 | 600 | |
| Dimensions (mm) | 270x119x216 | 278x119x216 | 320x134x232 | 320x134x232 | 370x140x252 | 370x140x252 | 390x140x252 | |
| Weight(kg) | six | 7 | eleven | eleven.8 | fifteen | 15.5 | sixteen | |
| Brand Name: | OEM |
|---|---|
| Model Number: | Vp125r |
| Power: | 1/4HP |
| Oil Capacity: | 180ml |
| Weight: | 6kg |
| Transport Package: | Carton |
###
| Customization: |
Available
|
|---|
###
| Model | VP215R | VP225R | VP235R | VP245R | VP260R | VP280R | VP2100R | |
| Flow Rate (cfm) | 220V~/50Hz | 1.5CFM 42L/min |
2.5CFM 70L/min |
3.5CFM 100L/min |
4.5CFM 128L/min |
6CFM 170L/min |
8CFM 226L/min |
10CFM 283L/min |
| 115V~/60Hz | 1.8CFM 50L/min |
3CFM 84L/min |
4CFM 114L/min |
5CFM 142L/min |
7CFM 198L/min |
9CFM 254L/min |
12 CFM 340 L/min |
|
| Actual Ultimate Vacuum | 3Pa 25Microns |
3Pa 25Microns |
3Pa 25Microns |
3Pa 25Microns |
3Pa 25Microns |
3Pa 25Microns |
3Pa 25Microns |
|
| Power(HP) | 1/4 | 1/3 | 1/3 | 1/2 | 3/4 | 1 | 1 | |
| Motor speed (r / min) |
220V~/50Hz | 2800 | 2800 | 1400 | 2800 | 1400 | 1400 | 1400 |
| 115V~/60Hz | 3400 | 3400 | 1700 | 3400 | 1700 | 1700 | 1700 | |
| Inlet Port (optional) | 1/4 SAE | 1/4 SAE | 1/4 SAE | 1/4 SAE | 3/8 SAE | 3/8 SAE | 3/8 SAE | |
| Oil Capacity (ml) | 180 | 280 | 360 | 350 | 700 | 600 | 600 | |
| Dimensions (mm) | 270x119x216 | 278x119x216 | 320x134x232 | 320x134x232 | 370x140x252 | 370x140x252 | 390x140x252 | |
| Weight(kg) | 6 | 7 | 11 | 11.8 | 15 | 15.5 | 16 | |
| Brand Name: | OEM |
|---|---|
| Model Number: | Vp125r |
| Power: | 1/4HP |
| Oil Capacity: | 180ml |
| Weight: | 6kg |
| Transport Package: | Carton |
###
| Customization: |
Available
|
|---|
###
| Model | VP215R | VP225R | VP235R | VP245R | VP260R | VP280R | VP2100R | |
| Flow Rate (cfm) | 220V~/50Hz | 1.5CFM 42L/min |
2.5CFM 70L/min |
3.5CFM 100L/min |
4.5CFM 128L/min |
6CFM 170L/min |
8CFM 226L/min |
10CFM 283L/min |
| 115V~/60Hz | 1.8CFM 50L/min |
3CFM 84L/min |
4CFM 114L/min |
5CFM 142L/min |
7CFM 198L/min |
9CFM 254L/min |
12 CFM 340 L/min |
|
| Actual Ultimate Vacuum | 3Pa 25Microns |
3Pa 25Microns |
3Pa 25Microns |
3Pa 25Microns |
3Pa 25Microns |
3Pa 25Microns |
3Pa 25Microns |
|
| Power(HP) | 1/4 | 1/3 | 1/3 | 1/2 | 3/4 | 1 | 1 | |
| Motor speed (r / min) |
220V~/50Hz | 2800 | 2800 | 1400 | 2800 | 1400 | 1400 | 1400 |
| 115V~/60Hz | 3400 | 3400 | 1700 | 3400 | 1700 | 1700 | 1700 | |
| Inlet Port (optional) | 1/4 SAE | 1/4 SAE | 1/4 SAE | 1/4 SAE | 3/8 SAE | 3/8 SAE | 3/8 SAE | |
| Oil Capacity (ml) | 180 | 280 | 360 | 350 | 700 | 600 | 600 | |
| Dimensions (mm) | 270x119x216 | 278x119x216 | 320x134x232 | 320x134x232 | 370x140x252 | 370x140x252 | 390x140x252 | |
| Weight(kg) | 6 | 7 | 11 | 11.8 | 15 | 15.5 | 16 | |
How to choose a sprocket in CZPT
Sprocket is one of CZPT mechanical villagers. It can be found at levels 50, 55, 60 and 65. Like other mechanical villagers, it has a metallic texture and occasionally makes mechanical sounds when moving. It prefers green/orange and active/simple style colors.
Pitch sprocket
When choosing a pitch sprocket, you need to consider several factors, including the pitch diameter. This affects the torque applied to the shaft and the length of the moment arm. Additionally, incorrect pitch can affect belt life and wear. The pitch diameter should be measured by wrapping the belt around the sprocket at a 180-degree angle to the rod head. You can also consult engineering guidelines and product sheets to determine proper spacing.
The pitch diameter of a sprocket is the distance from the center of the pin to the next pin in the chain. The pitch diameter also determines the size of the sprocket teeth. The larger the pitch, the larger the teeth on the sprocket.
The diameter of the pitch sprocket depends on the type of bike. If you have an older bike, you should choose a sprocket with a diameter closer to the hub. If your bike has a smaller diameter rim, you can choose a sprocket with a smaller diameter and larger caliper. In addition to the caliper diameter, you should also consider the hub diameter.
Proper pitch sprockets can last longer. They are made with hardened teeth to increase their longevity and durability. You can choose between single-purpose and dual-purpose sprockets. Single-tooth sprockets have one tooth per pitch, while double-tooth sprockets have two teeth per pitch.
A pitch sprocket is a component of a bicycle chain. It prevents the chain from shaking due to uneven load distribution. Plus, it helps the chain stay tight.
three sprockets
Triple sprockets are toothed or cogwheels that move the chain. The pitch circle diameter of the triple sprocket is two and a half inches. Most rear sprockets are made of aluminum. The quality of the aluminum sheet used to make the sprocket varies from manufacturer to manufacturer. However, CZPT only uses the best aluminium sheets on the market. The sprockets are then shaped on a hobbing machine to ensure a perfect fit with the chain. The final anodizing process improves durability and adds personalization. The manufacturing process of CZPT is a quality control process with an uncompromising commitment to perfection.
Cone lock sprocket
Taper lock sprockets are one of several types of sprockets. It has openings in flanges and tapers, making it ideal for a variety of applications. These sprockets also have the advantage of being easy to install and remove. These sprockets are also available in pre-drilled models that are pre-drilled to fit the shaft diameter. This allows for easier installation and improved alignment. Also, you can replace the sprockets without replacing the entire gear train.
These sprockets have flame hardened teeth for extended chain and sprocket life. They also help reduce drive noise. They are available in a variety of sizes, including duplex and triplex. In addition to being made of high-quality steel, they are also available in cast iron and metric models.
Quick release sprocket
There are several different styles of quick disconnect sprockets. Typically, they come with a 2″ hole and are compatible with various welds on the hub. The Quick Disconnect (QD) style is a special style with a split design on the hub and use of torque bolts to make it easier to install. This type of sprocket is very popular in the power transmission industry.
Irregular sprocket
Idler gears are small gears that run on the chain. This sprocket can be used for a variety of purposes and is available in a variety of configurations. Its most common configuration is a ball bearing, pre-lubricated and sealed against moisture. Other idler sprockets have needle bearings, which are more stable and can handle higher capacities. Bronze bearings are another option as they have no moving parts.
editor by czh2022-11-25